Opening The Door To A Beautiful Garage


Regardless of being the first room that most house owners see when they enter their homes, the garage is most likely the most ignored and also least talked-about room when it comes to home improvement.

The normal dull as well as stained concrete garage flooring deals with years of hefty foot as well as auto traffic. The good news is, there are means making even one of the most beat-up garages look great-and home owners could do it themselves. Professional concrete epoxy flooring could renew a garage floor, make garage cleaning less complicated and aid prevent the need for future pricey floor repair services. Right here’s how you can recover your flooring.

Tools Of The Profession

To restore your garage flooring, homeowners will certainly require Quikrete Epoxy Flooring Coating Set (consisting of instructional DVD). This all-in-one, easy-to-use package beautifies and also secures concrete garage floors from hot tires, gas, oil, scuffs as well as deterioration with a finish two times as strong as concrete. You’ll also require a flat, stiff bristle brush, plastic watering can, yard pipe, press broom, a 3/8-inch roller with expansion manage, roller tray as well as a 2-inch, solvent-resistant brush.

What To Do

• Cautious preparation of the garage floor is necessary for favorable end results. Making use of a press broom, move whole location to remove all dust as well as particles.

• Wet concrete surface, add Bond-Lok focus to 3 quarts of water in watering can to degrease, tidy and also etch in one action.

• Working in areas, move watering can back and forth while pouring to increase appropriate insurance coverage. Use bristle brush to thoroughly scrub stains and spread cleaner.

• Once each section is cleansed, wash away dirt with a yard pipe. Repeat process up until entire surface area has actually been cleansed, adhering to with a last pipe down of the garage.

• Wait till concrete is completely dry (at least 4 hrs) before epoxy application.

• Combine Part A of instrument with Component B and also enable epoxy to sit for 30 minutes prior to use.

• Starting at the rear of the garage, spread epoxy covering in smooth, also strokes throughout a 2-by-6-foot area.

• If using color flakes, they need to be applied to damp paint. After covering each 2-by-6-foot section with the epoxy coating, lightly sprinkle flakes into concrete.

• Continue process, working in areas, till whole garage surface is covered.

• Allow epoxy to harden for 12 to 1 Day prior to light foot web traffic and 72 hours for automobile web traffic.